My circular saw only works intermittently?

I am looking for a wiring diagram for the control
switch for power devil 10"table saw
thank you

graham
November 2015

Sean - this is a free help site - not a shop or repair depot.

The control switch you have will probably be a safety switch - if the power is interrupted you need to select on for the saw to operate - stops the blade starting on its own when the power is restored.

You do not describe what you mean by intermittently but no matter. If after a stoppage you have to press the go button to make the machine run then the fault is between the supply and the switch - if the motor starts without pressing the button then the fault is after the switch - I would look first at the wall socket and the plug on the end of the cable.

Good Luck...
September 2015