Recent: Safely remove screen protector from a Macbook Air?

Mend > Circular Saws

Mend Mac Allister MRS1400 Start Changed Fuses

my mac allister mrs1400 scarifier wont start?

mac allister mrs1400, wont start have changed the fuses - any ideas guys

newby
August 2015
Hi tried the trigger switch, no luck - opened switch port, and all prons connect too, tied cleaning the contact and changed the fuse - but nothing at all, I cant even hear the motor attempting to make a whirl

newby
August 2015
thanks i'll have to dismanle and have a look - really appreciate your feedback :-)

newby
August 2015
No - when a switch operates you can often hear a click - my limited experience suggests the switch in the trigger mechanism as the most probable cause.

As a cynic I suspect they deliberately design weakness in the trigger switch to encourage more sales - all manufacturers.

Good fortune...
August 2015
hi, thanks for replying.

there's no sound at all. it's an electric not petrol if that makes any difference?

newby
August 2015
These things often have a pretty ropey trigger switch - if it were mine I would suspect the trigger.

Listen to it - can you hear a click?

Good Luck...
August 2015

Related Questions ...

Mend no sensor fault starter
1

I have a no start issue?

Hi I'm busy with a 2004 e46 320d, the previous guys changed the motor and now it does not start. I have run an... [Read more]
Mend fuse blow start
1

why would starter control fuse blow?

i have a citreon dispatch 1.6 hdi van i tried to start this morning i turned the key the normal lights on the ... [Read more]
Mend start battery ignition
2

Ford KA won't start?

I have a 53 plate ka I changed the battery now it won't start there is no battery light when ignition and no e... [Read more]
Mend immobiliser turbo diesel
3

02 Escort 55 1.8TD Immobiliser light not on?

I changed the head on my work van. Started fine the next morning. Ran ok going to work except for a bit of a h... [Read more]
Mend fuel pump no start ford fiesta
1

how can i fix my 1998 ford fiesta fuel pump problem?

my 1998 ford fiesta would not start, I can turn the engine over but it would not fire up, I had the r-a-c- com... [Read more]
Mend lawn mower engine starting problem
1

How can i fix my countax c600h?

Yesterday i was using my 10+ yr old countax c600h Briggs and stratton 16hp engine and all was fine. Just befo... [Read more]
Mend ford focus central locking fuses
1

central locking problems ford focus zetec 05 plate ?

central locking not working changed fuses 55 still not working tried to re programme with key in start mode I ... [Read more]
Mend immobiliser electrical problem battery
1

car wont start?

I have an R reg Megane, it was not used for 2 weeks and when I went to use it it started first time and then i... [Read more]
Mend immobilizer fuel pump engine
1

renualt megan start trouble ?

my car fettled and died a few weeks ago. when i turn the key the engen turns over and sparks but it wont go. h... [Read more]
Mend start changed spark plug
2

My 1977 porsche 911 won't start?

My Porsche won't start. I've changed all 12 spark plugs (it has twin plug heads), and am getting plenty of fue... [Read more]
Mend ecu wiring ignition
1

no dash lights?

when i turn on ignition i have no dashboard lights, the engine will turn over but wont start the heaters work ... [Read more]
Mend riding mower engine spark plug
5

My Murray / Briggs & Stratton 12 HP Riding Mower - Has No Spark?

I have a 2003 Murray 30" rider with a 12 HP B&S engine. I tried to start it this season and it would not ... [Read more]
Mend wrong problem changed
2

My 1990 Honda Accord wont get fuel what could be wrong?

I have a 1990 honda Accord with a fuel delivery problem. It ran this morning but wont start now. I changed the... [Read more]
Mend immobilizer key fob battery
3

MY CAR WONT START?

I HAVE A RENAULT LUGANA AND IT HAS A BUILT IN IMMOBILIZER THE BATTERIES HAVE BEEN CHANGED IN THE KEY FLOB AND ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Circular Saws ...