The flexible hose on my DC04 seems to have a small hole in it. The cleaner works fine, as long as I hold the hose into the cuff at the wand end, but I would prefer to remove the cuff, trim the hose and refit it all. It cannot be further than 50mm from the end of the hose.
How can I remove and refit the cuff at the wand end of teh flexible hose, please?
I just hacksawed the hose off the cuff at the point where the hole Is, which was fortunate as the hole was just about 1" back from there. I then got a pair of pliers and just pulled out the old part of the hose. Which is only glued in. Then I silicone the hose back in, and left it over night. As good as new but a little shorter.
Migwell
October 2014
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vacuum cleaners.