Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Alarm Systems

Mend Power Supply Relay

power supply and relay?

hi there i want to add a second bell box to my alarm so i have an additional power supply, reading alot of forums i realise that you need a relay for the bell and strobe triggers, forgive me for being naive but what would happen if i just jointed the triggers from the panel cable without the relay? i would obvously link the negative from the psu to the panel, but what would happen if i didn't use the relay for the triggers, thanks

calum
March 2014
e manno,i took a look at a yale ,wont call it an alarm system,today,i removed the one fixing screw on the bell box,it went off,but,not reg on the control panel also the wires of the sounder are open,i.e.you just pull or cut the speaker wires,they are exposed ,what a bit of trash ,powered by 4 "d" torch batteries,only looked at it coz was for a friend,terrible my friend what some people buy to protect their home,they called yale who told them we don't have engineers in Scotland to fix your system ,they not tell them that when they took her money

gts
March 2014
Yale suck all the way in my opinion but they have made my job easier over the years with over 90% used throughout the UK.

Very easy to pick and even their best padlocks can be shimmed, want a good security lock then go for any from schlarge or weiser.

Like anything you get what you pay for :)

e manno
March 2014
yale make locks,(not very good ones )but they suck their so called alrm systems,my cat could defeat them ,:-),no pro would touch them,cept to rip them out !

gts
March 2014
yeah the 9600 is great and high quality but old, alot better than that diy wireless crap from b and q, thanks and goodnight

calum
March 2014
most high quality panels will handle two bell boxes mate,you get what you pay for ,and if you now how to wire them ,we on this site do not use cheap trash

gts
March 2014
also im interested

calum
March 2014
i was unsure with the load as most panels dont seem to handle 2 bellboxes, the 9600 can after reading about about its a great system and im lucky to have it, thats all i was saying

calum
March 2014
If it was easy for you.
Why all the questions?

Alarm
March 2014
oh the job is easy, i was just implying how great the 9600 as ive discovered

calum
March 2014
must be my friend alarm guy :-),so much fuss over a very simple job :-)

gts
March 2014
Is it crank calls week??

Alarm
March 2014
Thanx gts and yep I'm thinking same lol.

e manno
March 2014
wow, i never realised how great the 9600 alarm sytem is, aint i lucky:)

calum
March 2014
ok thanks:)

calum
March 2014
forgive my manners e manno,welcome back :-)

gts
March 2014
yes it will

gts
March 2014
sorry i meant to say will run the internal speaker as well as the 2 sounders ,thanks

calum
March 2014
thanks , does that include the internal speaker

calum
March 2014
scantronic panels are very popular coz their very reliable and easy to fit,and the 9600 will run two sounders as e manno said,simple matter of wiring them up prop

gts
March 2014
the 9600 seems to be very popular on here

calum
March 2014
e manno ,are you thinking what am thinking ???:-)

gts
March 2014
wow you must be physic lol, yes it has 9 zones, 2 keypads and internal speaker, will it run 2 texecom oddysseys by itself without the psu? thanks

calum
March 2014
correct it is a 9600, will it run 2 texecom oddyseys?

calum
March 2014
Let me guess 9600??.

Why it will run two sounder no probs.

e manno
March 2014

Related Questions ...

Mend battery fuse relay
1

12v problem ?

my question refers to a swift supreme globetrotter, year 2005, the problem lies in the 12v system, on leaving ... [Read more]
Mend u power circ
1

Can U Fix My McKeller Power Circ Saw?

1] After frequent stop/starts motor 'reved' and could only be stopped by pulling wall plug. 2] Have checked s... [Read more]
Mend renault light plug
4

renault kangoo warning light pre heat glow plug?

Hi All can anyone answer this for me just bought a kangoo 15dci soon after the purchase have started to have a... [Read more]
Mend turn pressing power button
1

Hitachi 65SWX20B HDTV projection wont turn on?

When pressing the power button on the TV, it comes on for a few seconds. Then hear a click (relay?) and it sh... [Read more]
Mend turn flat red
1

Cannot turn on my Philips Flat Screen TV ?

I have a Philips Flat Screen TV, model # 50PF7321D/37. I have tried to turn the TV on and it will not come on... [Read more]
Mend How to mend it?
1

ELECTRICAL MALFUNCTION?

HAVE ROVER 45,I WAS DRIVING WHEN IT WAS RAINING.AT A SPOT THE ENGINE TURNED OFF.I NOTICED LATER THERE ISNT POW... [Read more]
Mend d bad starting
9

1998 citroen relay 2.5 non turbo d bad starting?

must have a problem with air in the supply side of the fuel system. wont start unless i hand prime the filter.... [Read more]
Mend power loss electrical
1

lost power to my fuel pump on my vw golf mrk3?

randomly lost power to the (in tank) fuel pump, have checked the fuses and relay and put a electrical meter on... [Read more]
Mend How to mend it?
2

Panasonic CT-27D21E w/ Chassis KP338 turns OFF & ON w/ clicking vs. heat?

1st – Stats = Panasonic CT-27D21E w/ Chassis KP338, Made Mid 2000, Purchased Christmas 2000, New in Box, No ... [Read more]
Mend How to mend it?
1

How can I fix a power supply, FSP Gprup, 250W, 2001?

How can I fix a power supply, FSP Gprup, 250W, Make is Medion 2.8gig 2001 The computer will not start at all e... [Read more]
Mend boiler heating ignition
2

HOW CAN I FIX MY POTTERTON NETAHEAT 10-16 BOILER?

WHEN THE POWER SUPPLY IS SWITCHED ON THE PILOT LIGHT COMES ON AFTER A FEW SECONDS BUT THE MAIN BURNER WILL NOT... [Read more]
Mend sony tv power supply
1

Whats wrong with my Sony TV?

My Sony kv-27exr20 ('91) has gone dead. It still goes "dung" when I turn it on (the degausser, right?) but no... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems