adjusting gearlinks after replacing the clutch?

seems ur release bearing may be out of place .easily put out of place when lifting in gear box.should be no noise when changing gear .waste of time messing with gears .seems clutch not clearing gears properly especially reverse .

joe maguire 02868641438
December 2013

There is a location peg hole on the gear stick under the rubber gator. At the gearbox end there is a peg with a spring on it that you need to push in.If you move the gear selector on top of the gearbox and press on the peg you should feel it pop in. You need to slacken the pinch bolt on the gear selector link rod under the car align both pegs and tighten the pinch bolt .

Raz
December 2013