All due respect to ck ,clearly knows his stuff, but if you tip it back and there is water inside it may drown the mains cable input block and possibly short out when you switch on again. Best to unplug and remove right hand side panel and suck out water with a turkey baster. Cause of leak will probably be a blockage in the pressure chamber bottom left of machine and the clear hose that runs from it to the sump front center. Cheers
Kenjo
October 2013
does it pump out all the time unless you turn it off at the wall?.If so antiflood in the base may of operated.lay dishwasher slowly on to its back and see if water pours out.if it does stand it up and retry.if it does work but fails after a short time you may have a blockage or leak which you will have to find
CK
October 2013
Automatic Answer
We may have found other answers which could help you.