Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Alarm Systems

Mend Scantronic 808 Engineer Reset Alarm

how do you complete engineer reset?

I have replaced the battery in my Scantronic 808 alarm box. But my control panel (929) says "call engineer" how do I reset this myself ?

Atul
August 2013
you have not insulted anyone on here mate I said I would send you the engineering manual ,but you not reply to me,the manual would tell you how to reset your panel back to the factry defaults so you could re programme it ,but you just ingnore me,so now you have to pay the price

gts
August 2013
Thanks for all your responses, sorry using site for the first time. Was not intending to insult anyone. I did download manual but that did not help as it simply says " call engineer". So I called company that originally installed it, albeit 12 years ago and engineer came but he could not reset either despite trying numerous engineer codes. So now having new alarm installed. Thanks again everyone!

Atul
August 2013
Yup his loss mate.

e manno
August 2013
ditto e manno people think we pros pick up our experience in a week or two ,I have been told "you have only been here for ten minutes"as no doubt you have been,if people don't want to take out a service contract well,they have to pay :-)you see I offer free of charge the service manuals to this guy but he not had manners to reply so he can call guy out pay the dosh

gts
August 2013
It's a fair price mate regardless of how long it takes,
Take the manual and perform a 1st stage reset or pay a pro and stop moaning.

We all have to earn a living,plus xp and peace of mind from a pro's visit don't come cheap in this trade.

e manno
August 2013
guess you just have to pay the piper,i go now .to olate was the cry

gts
August 2013
oh well, I did offer

gts
August 2013
or give me an address I will send you engineering manual

gts
August 2013
it does mate but we cant give out the info to reset your panel back to norm for obvious reasons did you try to google the engineering manual ?

gts
August 2013
Thx just tried the 07890 code, did not work. Called engineer, £110 plus vat!!!! Easy money for someone, I bet it only takes a couple of minutes. Thanks for your help,

atul
August 2013
you don't,unless you have the engineering code you could try 07890 if that don't work try your pin num ber,if that don't work get you wallet out mate

gts
August 2013

Related Questions ...

Mend alarm security system reset
4

Scantronic 9100 Alarm reset?

I have an old Scantronic 9100 house alarm with a reset problem having opened the front panel to inspect the b... [Read more]
Mend eurosec cp8l alarm
1

eurosec cp8l?

I have a Eurosec CPL8. An engineer fitted this for me and yearly he contacted me and said my alarm needed serv... [Read more]
Mend alarm security system home security
1

Scantronic 9651 aux dc fail?

I have just amended the programmed zones so that the kitchen sensor is not set when setting the system using B... [Read more]
Mend alarm panel engineer
2

alarm panel reset?

I have had some work done recently on my electricity mains board, and now my veritas alarm control panel is fr... [Read more]
Mend reset hello whilst
6

How can I reset PIR?

Hello Whilst successfully repositioning an existing PIR, I have accidentally set another PIR in my home as a ... [Read more]
Mend battery keypad tamper
1

Scantronics 9651 - and 9330 keypad?

Hello, My alarm started to beep intermittently and key pad display saying MISSING BATTERY. I didn't panic ... [Read more]
Mend security system home
1

Can't reset alarm?

My alarm went off when my dogs managed to get out of the kitchen into the hall. My neighbour managed to get in... [Read more]
Mend scantronic 9800 alarm
7

Scantronic 9800 alarm?

I was away recently and left my Son in the house. At around 4 in the morning the alarm set off with the inter... [Read more]
Mend security system battery
2

Have an opima plus 2 alarm, which we inherited with the house. Had a power ?

Have an Optima plus 2 alarm, which we inherited with the house. Had a power cut the alarm went off and showed ... [Read more]
Mend tamper battery engineer
4

lid temper reset?

i have alarm system 9651 scantronic. we changed the batt and now cannot reset it. shows lid temper this requir... [Read more]
Mend 2004 model going
1

Veritas 2004 model keeps going into temper ?

engineer came out For the yearly inspection after he left about 4 hours later the alarm keeps going off inside... [Read more]
Mend control panel sensor alarm
3

Eurosec PR5208 Mains Flt after drilling through cable?

Hi Guys I have a Eurosec alarm in my apartment with a PR5208 control panel. About eight years ago when I move... [Read more]
Mend alarm reset reason
3

Captiv8 alarm?

What is "ZEX TAMPER"? This message along with "ENGINEER RESET" is now being displayed on our keypad. I have ... [Read more]
Mend scantronic alarm moved
6

How Can I reset Scantronic 9651 House Alarm?

Hi, I moved into a rental property last year and the alarm has never been working, the landlord won`t sort ... [Read more]
Mend security system fault
7

scantronic 9452?

Internal alarm keeps sounding. was working fine until last week, however now keeps sounding. I have replaced... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems