Scantronic alarm?

I set the scantronic alarm 9800 to go to bed but it set off after two /three hours. I ran down to set it off and see code C2 on the key board. Could anyone help me why that is?

Jav
February 2013

what an ignorant sod you are zippo,if you have to come back to this site,dont count on any help from gts ,you have no manners

gts
February 2013

please let me know how you get on zippo,to leave a zone on soak test is not very nice,and you cannot do it by accident,

gts
February 2013

its an old system,but a very good one

gts
February 2013

its his way of getting more dosh from you ,shame on him get another guy out to reset the panel,not that crook

gts
February 2013

did not mean to sound rude,but we get asked so many questions regarding alarms but get no info ,like the make or model,this info helps ,

gts
February 2013

err,out 2 weeks ago,replaced batts and a sensor,now the panel say zone test failed ???one zone has been put on a soak test,this means if its tripped it will log the fault but cause no alarm,we norm do this to test a zone for faulse alarms,so you "nice"engineer must have left it on soak test,and guess how long its on for ??14 days

gts
February 2013

Thanks i believe it to be a 9600,what makes you think he's a crook and help would be magic.

Zippo
February 2013

your so called engineer a crook i take it its a radio system????since you dont have the brains to tell us ,no model number or anything give us a clue,is it a 500r ??a i-on 16 ?a 9600?????do you see where this is going ???????/

gts
February 2013