tamper loop Scantronic 9427 alarm?

one last thing,if all tamper loops are ok,your prob is in your bell box,

gts
November 2012

but be sure to remove the mains power from the alarm BEFORE you open the panel

gts
November 2012

and as alarm guy says,a please goes a long way,we think sometimes people think itsa computor that replies to them:-)

gts
November 2012

your alarm has a global tamper,if you cant find the fault,you can short the tamper out inside the panel,ur alarm will then reset,not the ideal solution as you wont have any tamper protection,i e if you remove any cover of a pir the alarm will not go off.to find the tamper fault,open the panel,you will find a bunch of wires connected together terminating to the global tamper terminal,use a test meter on ohms scale,test each tamper loop,the one that is o/c ,is the faulty one hope this is of help

gts
November 2012

Actually he is being smart..........aka Clever.


And CORRECT.

Also a trip to library will get you "The little book of manners"
some say the best publication ever.

Alarm
November 2012

and am not being smart,am telling you exactly what you need to do

gts
November 2012

yes,find the tamper fault

gts
November 2012