I have a Accenta G3 alarm System, service alert beep is irritating?

Should add the engineer code may be a prob as it maybe changed and locked by the installer you may be lucky and it's not or able to default it start with the manuel first

Jimmy
July 2012

You need the manuel look for timers and someone technical if poss it's a coupla mins job to dearm

Jimmy
July 2012

Agreed max is 800 set/unsets. Used twice a day 400 days, just over a year.

Alarm
June 2012

Ok for 3 years, then the Service Timer starts, I don't think so.

Been playing?

acorn
June 2012

If you have eng code :

Enter and exit engineering, this may silence it for a while or whilst in engineering locate flag B and turn the timer off.

You will need the engineering manual for help and additional programming if needed, or put your hand in ya pocket and pay somebody who knows what they are doing.

e manno
June 2012

It was already installed when we moved in and has been o.k. for nearly three years

Ken M.
June 2012

Agreed

Alarm
June 2012

Get it serviced by who ever installed it and insist that the service timer is switched off. Bet you didn't ask for that to be programmed, or even were told that it had been done. Bad practice to do that without informing the owner of the alarm system. It's only done as a get me back and spend some more money exercise.
If you installed it yourself, DiY it's in the manual somewhere.

acorn
June 2012