Base floods only on quick wash?

thanks kenjo but would it not flood on all programmes ?

john
September 2012

water flooding into base is usually the pressure chamber left hand side of machine overflowing due to a blockage in the hose that runs from it to the sump and sometimes the chamber itself. I have described how to clean these in recent questions if you trawl through them you should find it . If prob still there when both cleaned could be pcb fault. Cheers

Kenjo
June 2012

Thanks for your reply it says Bosch SRV43M03 GB/31

John
June 2012

Unusual prob as all progs use same water monitoring system. Come back with model no etched on top edge of stainless steel door and I may be able to help. Cheers

Kenjo
June 2012