SL 8 model 8SP 402 SL8 G3 panel?

ditto,alarm guy,as i tried to say,these days to change components,is waste of time,esp.on such a cheap panel

mm
June 2012

Not made IIRC now , the panel.
Easier to spend 30 quid and have a working cheap similar panel than mess about at component level, as it will go bang again. Trust me have tried.
One return call isnt worth the price of a resistor and I have hundreds of the buggers in my tool kit for when it is worth it.

Alarm
June 2012

Thanks for your reply. I did buy a new battery , connected it up and it works! I want to change the resistor because it may have changed value. I bought, and installed it in 2003, but I am not sure of the manufacturer, who is SL? I do have an electrical background, for many years I was a TV engineer, so I am not a novice on components but the physical size of resistors has changed over the years. this may be a safety resistor so I need to get the wattage correct.
Any info would be helpful.Thanks

Pete
May 2012

Bin time,only so much you can do with old tat.
Made in 1980 odd.
Many are still usable, not this.

Alarm
May 2012

i take it the colour bands are burnt,but i will tell you this mate,you are wasting your time,there will be more damage to the pc,better buy a decent panel,and replace the battery ,the wattage should be apparent by the size of the resistor,

mm
May 2012