The machine, approx 8years old, fills with water, but does not then go through a cycle. There is a faint sound as if a pump is trying to run. Pressing the reset button empties the machine. It may be FD8405, the etching is so faint.
Could be wash motor has seized due to a leak from its shaft seal or if it hasnt been used for a long time the shaft seal can stick . Or the motor capacitor is faulty, Or a piece of china or glass is stuck in the impellor housing. I would check the motor is free to turn first. unplug machine, remove right hand side panel 2 screws at front (sometimes have to remove lid first to make it easier 2 plastic clips at rear) then push the rotor of the motor round be careful not to slip and damage the windings. If not stuck the prob could be the capacitor mounted on the motor.Cheers
Kenjo
May 2012
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.