What is the correct wiring layout for a White Knight Sensordry?

I recently fixed a loose drum but in doing so I accidentally pulled off some wires. It now doesnt heat in the main cycle but gets hot in the cool down cycle. I have (on the tag block) left to right:

1) Incoming live (brown) connected to White with Brown stripe wire and a red one (which goes to the High/Low switch on the front)
2) Incoming neutral (blue) connected to light blue which goes to the over temperature sensor.
3) spare
4) Black with White stripe connected to Black (which goes to the High/Low switch on the front)

On the heating element looking from the top, from left to right;
1) Grey into a heat resistant sleeve
2) Grey into a heat resistant sleeve
3 and 4) Light blue to over temperature sensor

Is this correct?