my white knight 44aw is not drying but goes through the cycle?

How to wire heating element

James
October 2013

The first thing to check is the reset button on the rear of the appliance.
Pull the machine out and press the red button.
If it clicks, try the appliance again.
 
If that doesn't fix the issue you will have to meter the element and T/stats,

Any that have open circuits will need replacing,

also check the wiring for continuity,

if my memory serves me correctly there is a T/stat fitted to the exhaust duct
(fan housing), on occasions if their is a restriction in the exhaust vent it takes out this stat.

paul
March 2012

before changing element check thermostat first for close circuit,by putting direct power onto element is a sure way of testing for working.follow the wires to and from element and thermostat to see if their may be other trips or thermostats

jj
March 2012