Mend Zanussi Tumble Dryers

Mend Household Appliances, Tumble Dryers

Find out how to mend it for free.

Ask Question

Find out how to mend Zanussi tumble dryers

Related Categories

Mend > Tumble Dryers

Tumble Dryer?

My Zanussi TC7102W started to play up as it wouldnt heat up properly and dry anything.

I have got it down to one of the thermostats on the heating element, however, I cannot find them anywhere on their own, you have to buy the whole element.

The one thats gone has the markings Type 261/PB, 16(3)/250 ~ T175k.

Does anyone know where I can get this from as dont wanna spend the money getting the complete unit if I can help it. Many thank in advance.

Matt

Matt
February 2012

Zanussi Household Appliances, Tumble Dryers Tumble Dryer Properly

mine had a blue dot on it but also a hole, so paper clipped the hole and click, dryer working again, big thanks to veryone for tips.

arran
February 2022

The thermostat operates for a reason. Before resetting it, find the reason. It might be a blocked filter, blocked condenser or a more serious accumulation of lint. It might simply be that too much was in the drum - something is stopping the air flow to cause the stat to trip. Fix the cause first or you might have a fire on your hands and need a new kitchen/house.

Mike Fire Investigator
August 2021

If its the 261 pb with red dot then look on the back for a small hole,

gently push a paperclip into the hole to reset the stat,

if you hear a click........stat reset.

Thanks for Advise!!!!! all working as new!!!

Mirek
July 2021

I have the one with the blue dot in the middle ..where do i get a replacement..type 261/p 16(3)1175k.....hoover dryer fuse help

David brown
July 2020

OMG tanks so much, I didn't know you could reset it! Now I can start looking for the actual problem that caused it to overheat. Once again, thanks a lot guys, especially to paul!

Dido
September 2019

Many thanks brilliant advice I did not realise you could reset the fuse worked for me at least so thanks again saved me buying a new machine and all i did was move it to gain access.

Tom Milne
July 2018

Our Hotpoint Tumble dryer had the 261/P with red dot. Resetting with paper clip via hole worked a treat. Very loud click heard letting me know it had reset. Many thanks for this tip.

Roberts S
July 2017

Top tip re the red one, inserted needle, heard the click, resistance checked, all working like a dream. Thanks guys

Griff
April 2017

:-) Now my tumbledryer works again too..

Made a jumper, instead of the 261 pb, and installed the dryer outside :-)

Thanks

Jørgen Ulriksen, Denmark
September 2012

Guys, you're great! Didn't know what to do with my tumbledryer and you just gave me the answer. It did the trick!
Thanks a million!

Monique
February 2012

If its the 261 pb with red dot then look on the back for a small hole,

gently push a paperclip into the hole to reset the stat,

if you hear a click........stat reset.

The klixon ELTH is sold as one unit,

however a T/stat kit can be purchased from

www.espares.com

paul
February 2012

Find out how to mend Zanussi tumble dryers

Where is heater element on my zanussi Tc480?

Reset button in tumble dryer?

Lealing zanussi TC7102W tumble dryer?

How can I fix my zanussi tc7114w dryer?