why is the disks glowing before and after ?

I suspect eather the flexible hose has colapsed making pressure stay on if just one disk getting hot,if more than one pos master cylinder not letting fluid back hydroliking,does this car roll easy when pushed brakes off,had this with escort the pipe had colapsed when ya braked it took a mile fore one caliperto release

Steven,s
January 2012

Front or Rear ? if you have had new pads and disc's fitted they have not been correctly adjusted on the rear or the sliding pins have not been cleaned off properly to allow the disc pads to slide correctly, or the handbrake cable has been over adjusted holding the pads onto the disc's if you have just had the pads and disc's replaced take it back to the garage and ask them to repair correctly

Alan
January 2012

they or you are applying too hard ease up on the brakes it happens on race cars all the time. if it is not you try bleeding the brakes so they are not grabbing so hard

duey
January 2012