what is the best way to change rear brake pads on laguna 1.9dci 04 reg than?

do the n/s first disconnect the hand brake cable the piston dose need winding in you may have to open the bleed nipple make sure you have the top of the mastercylinder under the bonnet as the fuild you push back will come into the cylinder, once you have the pads back in bleed the brake on the side before attaching the hand brake once bled pump the pedal roughly 30 times then re-connect the hand brake, then repeat the opperation on the other side, not really a job for a novice

dave christer
December 2011

if you have ever done the front pads,then the rear is a similar task,the only specialized tool you will need is a brake rewind tool,or cube,available from most motor factors.this tool rewindes the piston in the callipers to allow fitment of the new pads.you could try searching the internet, for video tutorials, or purchase a haynes workshop manual.

tranny granny
December 2011