Please help me start it?

do you still need help ??

norb
December 2011

idon'thave the info i need at hand ,and it's too complicated a system to describe on here ...a first step though is check that the ecu is securely mounted on to the engine ,as if the bobbins are worn ,it cause wiring to chaff and can destroy the ecu ..i will post some other checks later ..though if you don't have any dealers you could always remove the loom ,open it and check the wires ,if you have the time ....also near the large ecu plug if you open it ,is a resistor and the if the wires going in to it break then you won't start

norb
December 2011

thats the biggest problem norb there is no dealer for these trucks here in zambia so if you can avail me with some little more data about the CAN from the fuse box to the ECU thanx

Michael
December 2011

wiring issue ,check feeds at ecu and the CAN ...i guess the EBS warrning is atually ABS ,as the LF doesn;t have EBS

norb
December 2011