Hi,
My Beko D3422FW Dishwasher has decided not to stop. The cleaning cycle works fine. I'm reluctant to spend £60 on a new timer unless I know that's the problem. I had to fit a new rope hinge and noticed a pipe from the drainage blocked with scale. This I cleaned out. Since then this new problem has turned up. Is it connected??
Please hep me as this is not a good time to buy a new machine.
Thanks
Its the mechanical switch. It opens up in sections. As the dial turns it triggers the switches. I cleaned the contact points added solder to the worn copper plate that moves from a to b and voilà. Works a treat
paul
October 2014
does the drain pump run continually?.if so lay dishwasher on its back and see if water comes out
ck
October 2011
I unblocked a pipe which I think was marked pressure switch?? I had a small amout of water before left in the bottom of the machine but now it's all nice and clear. Any other suggestions?
Thanks for your prompt reply
David
October 2011
is there water in the base?
lay dishwasher on its BACK ONLY and see if water comes out.if it does you have a leak or blockage
howtomendit.com for free repair help, information and advice.
