diplomat adp8352 three flashing lights?

hi, mr archer,a series of flashing lights and beeps would suggest a error code,lights that are lit but not flashing would suggest a bad pcb/brain/or damage to the wiring.if the pcb reset didn't work try this =unplug the appliance and take off the inspection cover below the door ,.see if it is full of water,if it is use a sponge and dry everything out.get back to us with your findings.

mech monster
October 2011

no the repair man never took the machine out,also when they flash it beeps as well,i will try it thanks

mr archer
October 2011

try getting a second opinion .check your local paper for another engineer ,try find one with no call out fee and post his diagnosis we would all like to know on here thnx and good luck.

mini mech
October 2011

hi,the first three flashing led,s suggest a leak into the undertray,it can also be connected to a blocked filter.try pressing the program cycle button 4 times quickly ,all lights should go out,then lights 1 and 5 should appear flashing,.switch appliance off,then close door,.wait a few seconds and power machine on . if the appliance starts working it probably won't get through the cycle before it aborts showing same error code.iam assuming that the engineer had the appliance out ,had the back off to check for leaks ?.if he hadn't then I don't see how he could say the timer/pcb was at fault.you didn't mention in your discription any audiable beeps??usually in pulses of 10 .

mech monster
October 2011