you will need a brake caliper wind back tool for the rear
cdc
September 2011
The rear brake pistons don't normally just "push in" they have to be rotated either clockwise or anticlock and to do this without damaging the piston a piston retract tool is the best method, as it will apply pressure and allow it to rotate at the same time
nigel
September 2011
They are all straight forward, As long as you have some tools, socket set, or spanners, socket set prefered, take wheel off, use some thing to move calipers apart, I use a G clamp, But a screwdriver used correctly, will not damage anything, to prise the calipers open, unbolt calipers, pull out old pads, push in new, refit, job done
SD
September 2011
I can answer this question...
how do i change the rear brake pads on nissan primera 2005?