i had a rare problem of the throttle cable snapping, it was replaced and now the bike starts, but try accelerating and the engine dies, had the carb out and cleaned but still does it, sometimes it goes for 100m but then you have to stop accelerating and wait a few seconds... please help
have you got the standard air filter on it?and is in good condition with no holes in it?you may be able to sort it out by raising the needle in the carb slide by putting th circlip on the needle at the slot nearest the pointed end of the needle,the problem you have is a fuel problem either the carb or the fuel tap and also it can be caused by water in the fuel.try draining the carb off to it has a small screw in the side at the bottom of the carb this will let any sh*t and water out if you undo it for 10 seconds then do it back up again.good luck
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.