It is the OIL that determines the dilution ratio a machines requires and NOT the machine. In the past, most 2-stroke oil was poor quality mineral oil, and generally it was recommended it was diluted at a ratio of 25:1. However over the past 15 or so years, oil manufacturers have produced better quality oils- semi synthetic and fully synthetic, which require much less oil to produce the same (if not better) results than older types of oils. Therefore you should buy a good quality 2-stroke oil from a reputable manufacturer and then read what the recommended dilution ratio is on the BOTTLE, and only dilute at that ratio and you won't have any problems.
pleasant
September 2011
howtomendit.com for free repair help, information and advice.
