How do I remove the door handles on a 2011 ford transit connect?

avoid reading all others answers!!!! after spending 2hrs trying to take out drivers lock cylinder, it is very easy!!! Take out trim panel,window channel. Take off horseshoe clip, put key in cylinder half turn counter clockwise(unlock), press release button on barrel(in front of theft devise) then turn clockwise!! After that handle is exposed, once latch is removed.It blew me away at how easy it was. good luck

John P
March 2013

remove door card,rear window channel,drill out rivets holding a/theft cover and remove,one wire clip to disconnect from lock,remove large horshoe clip from barrel,to remove barrel insert key and turn a/clockwise ,this releases a plunger and turn whole barrel also a/clockwise to remove,three torx bolts holding lock,when released remove the cable from the inner door catch and remove lock assy,not sure but think 10mm nuts hold the outer door handle on.

cdc
May 2011