On the F&P IW812, I have replaced the main control switch unit. Can you let me know if there is a wiring plug that goes to the solenoid and how to identify it. The service shop that was repairing my washer has closed down and I have bought the part and fitted. I believe there is a plug that activate the solenoid. Wiring Diagram might help.
There should be a wiring harness with a single plug one end and 4 wires two red & two blue. The single end plugs in to the control module. The two blue wires plug in to the cold inlet solenoid & the two red wires plug in to the hot one.
Lincoln Appliance NZ
May 2011
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.