the above shower is not shutting the water off when finished. temperature control is fine as is hot and cold selector until you go to turn it off at which point water carries on coming out. which part do i need to replace? Any help greatly appreciated.
I have just had the same problem it is probably the top dial which has probably broken inside. You will need to order a new replacement part S12111003 and undo the three screws holding the cover on, then simply replace the plastic knob which has probably split. I hope this helps?
Darren K
May 2011
if you mean it runs for about 5-10 seconds after being turned off, that is normal.
joeg
April 2011
Automatic Answer
We may have found other answers which could help you.