9827 Keypad for 9800+?

Hi gts, I have recieved the Keypad thanks, but its a 9930 model not the 9827.I'm not sure it will work with the 9800+ panel, as the contacts on this one has 0v, 12v DATA & CLK.
the 9827 only has 0v, 12v & SIGNAL.
I really appreciate your kind gesture, but I would still like to reimburse you the postage costs for the one you've sent me. Please let me know how I can do this
Cheers
Benny

Benny
February 2011

you should have it by now benny,let me know how you get on,

gts
February 2011

its on its way,and forget the postage mate,:-)

gts
February 2011

no worries, will do (;-).
regards

Benny
February 2011

p.s.dont forget to set the address on the keypad to match your old one,(not that you would,of course) :-)

gts
February 2011

Hi gts, thank you very much. I got the engineers instructions so don't worry. Will let you know when I get it.
Cheers
Benny

Benny
February 2011

no prob mate,no harm done:-)will post the keypad tomorrow,do you need the engineering instructions too?
will pop it in,have fun,regards,c.maguire.gts

gts
February 2011

Thank you very much gts, im sorry if i came across the wrong way earlier, was a little stressed out, but honestly no hard feelings (:-), I agree I was stupid for not powering down first. I thought doing so may activate the external sounder.
The addy is:
C. Weerasinghe
Comet
Engineers Way
Wembley Retail Park
HA9 0ER

How do I pay the postage? do I send you a cheque once I recieve it?
I will appreciate if you can post basic signed for, just incase it goes missing in the post.
Thank you once again.
Kind regards
Benny

Benny
February 2011

nice to be nice,(some times)alarm guy,!!!!

gts
February 2011

got my nums mixed up,its a 9651 :-)not 9561 :-)

gts
February 2011

no prob if you give me a postal address i will send it to you,i took it of a site that wanted a bigger panel with more zones,we fitted it originally so i know its fine.if you dont wish to give your own addy,then any one that will keep it for you will do,

gts
February 2011

Gts, I know its my fault I should have powered down, I've learn't my lesson for the future. I'm 100% sure the control panel is fine, only keypad busted. I've walk tested & tested outputs /bell/strobe, all is fine. I guess I was lucky!
I installed system myself 10 years ago, hasn't skipped a beat.
Would like to keep the system, if you have the 9827, I will appreciate it very much.
thanks

Benny
February 2011

gts, ok, not offended ok (:-). pcb is fine cos system is fully functional on another keypad(d/stairs). pcb on upstairs keypad busted. I was making connection at the keypad end.
There is no 9561 keypad.

Benny
February 2011

Don`t know why you bother TBH.

Bardus ut bardus est.

:D

Alarm
February 2011

oh,and the latin means,they condemn who do not understand,(benifits of a classical education) :-)

gts
February 2011

if you want the 9827 i will send you one,its not new.but it works just fine,you can have it for free,you just pay the postage,and its yours,

gts
February 2011

condemnant qui non intellingent !

gts
February 2011

and how do you know you have not damaged the pcb?
you will not get the 9800 keypad,they are obsolete,but you can use the 9561 keypad ,you really must lighten up mate,we come on this site to give help,but we like to have a laugh as well,if you cant take a bit of banter,tough .

gts
February 2011

you read my tex again friend,it was a joke,thats why i put a smiley on it if your too sensitive tough,

gts
February 2011

I'LL just clarify again, its not the panel thats damaged, its the keypad. I need a replacement Keypad.
regards

Benny
February 2011

hey gts, no need to get personal, the idea on here is for somebody to help not critise, so you can take your inappropriate comments elsewhere & for your information I ain't a dope nor an idiot!!! & oh, I haven't ruined my good old 9800 (:-)Plse read the post!

Benny
February 2011

your a dope,and deserve all that you have caused your self,you should have powered down the system before you buggered about with it.you have ruined a very good panel,poor 9800.having an idiot as an owner!!:-)

gts
February 2011

Hello Acorn, what happened is this:
I disconnected keypad with system in eng mode.
Upon reconnection, had system in Eng mode, then proceeded to wire up. In doing so, I managed to short the 12v connection onto the pcb! there was a slight burning smell. Now what happens is that all the leds light up & no display on the keypad. it seems locked.

Before you mention it, I was lazy, should have first disconnected the keypad wiring at the panel, but there you go.
So I presume its beyond fixing now(:{
regards

Benny
February 2011

"I suspect I have fried the pcb"

What makes you think that?

Explain the symptoms.

Carry on here, it's easier to keep up.

acorn
February 2011