Recent: Will I need to replace my garden tap?

Mend > Home Alarm Systems

Mend Scantronic 808 Battery Changed Code

Scantronic 808 battery missing?

I have changed the battery and done reset to the default 07890 install code and 1234 user code, I put a new battery of exact same spec but still shows missing battert message. when I type 07890, it shows error message : " 01 flts cant rst"
can some one tell me what to do?
thanks

hrytn
January 2011
I dont have the installation manual, can any one tell me a link where i can get it from?! or if someone has the pdf version to email it to me?!
thanks in advance

hrytn
February 2011
if that is the case,kiss the panel by, by,:-)

gts
February 2011
I think the battery is connected back to front.

Alarm
January 2011
and dont use the engineering code unless you know exactly what you are doing,or you will end up deep the the brown stuff

gts
January 2011
the panel is telling you there is a fault on zone one,
dont you read your user instructions????

gts
January 2011

Related Questions ...

Mend scantronic keypad battery
2

Scantronic 9800 problem?

Hi, this morning I unset my alarm (28 years old) and as I am doing some electrical work in the kitchen, I need... [Read more]
Mend alarm security system reset
2

I have code E showing on my Scantronic 9827 pad Can't activate alarm?

Scantronic 9827. Having changed the battery I tried to activate the alarm but pad display shows E. I have att... [Read more]
Mend error code battery
4

Error code altex?

Error code came came up after battery was changed
Mend alarm code wrong
1

Intruder alarm Optima xl 4?

OPTIMA XL4 Trying to put in the code, nothing happens, have I pressed a wrong button. I have changed the bat... [Read more]
Mend battery house installed
1

Vertitas 8C alarm - internal battery keeps dying?

Hi I have a Veritas 8C alarm in my house which was installed prior to moving into the property 4 years ago. ... [Read more]
Mend power flashing code
1

optima 2 plus failure?

Optima 2 plus alarm is continually bleeping and the power light is flashing together with the error code showi... [Read more]
Mend need new panel
4

do i need a new panel?

hi i have got a scantronic 9800 alarm panel the other night while in the unarmed mode it started alarming wi... [Read more]
Mend security system tamper
7

Scantronics 9448+ woes?

Hi I recently changed the battery due to the alarm going off intermittently when not set,big problem now is th... [Read more]
Mend security system power
5

Veritas 8c reset?

I have a veritas 8c alarm in my house that I rent out. The code has always been 4321. I got the house back las... [Read more]
Mend security system alarm tamper code
2

How do I fix tamper code on Paragon Pyronix alarm?

Just changed the battery on my Paragon Pyronix alarm and now can't set the alarm as can't get past tamper erro... [Read more]
Mend security alarm code
3

Omnicron 7000?

Please help. I've just changed the battery and now my pin code doesn't work.Now it says keypad locked. Ma... [Read more]
Mend security home battery
6

Scantonic 9800 system?

Can any body help. I have scantronic 9800 alarm sytem fitted 20 years ago. Recently it started to play up. I h... [Read more]
Mend displays changed battery
6

ADT Galaxy keypad displays squares??

I have recently changed the battery in our ADT alarm and I turned the mains off. when I switched it back on,... [Read more]
Mend alarm security system keypad
8

scantronic 9449 alarm?

The external siren of my Burglar alarm does not work.The battery of the siren has been changed as it was broke... [Read more]
Mend 9449 alarm battery
3

Scantronic 9449 alarm problem?

My scantronic alarm acted oddly in that alarm would go of for no reason.I changed the back up battery but stil... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems