elu ps174 chopsaw? brushes?

On my Elu PS 174 to change the brushes involved removing the blade & the static guard only.....two screws secure the brush cover plate, which is located behind the spring of the sliding guard...I found access easier with the exposed end of the spring disconnected & moved to one side. Changing the brushes is now a straightforward operation after removing two screws holding each brush assembly in place.

Edward Teach
February 2017

Thank you, the comments you made we're very useful and now to search for getting new brushes.

Booby
September 2013

Remove the blade and both static and sliding safety fences the sliding fence has a wire and spring screwed to the back best left on as they need to be positioned fairly accurately ( but not a great problem) unscrew ( 3 screws )on plastic cover this will reveal 2 oblong holes with 2 screws in each (these are the brush covers ) remove these and the rest is easy.

Rod
February 2012