Whirlpool 6th sense Whirlpool condenser Dryer AWZ7913 all the red lights?

It also worked for me. Thanks a lot!

Daniel
August 2024

6 o-clock > Start button 3 times > Turn once clockwise (so its on airing) > Start button 3 more times.

O M G - it worked! Thank you so much.

Tom
January 2017

Hi ive tried wat has been put on here an it hasnt worked

jennette
October 2016

Aww it didn't work for me :/
On my model i have start pause and start delay buttons, tried both but still nothing

Lisa
August 2016

After a crap week with other electronic appliance's breaking on me, i thought my dryer was broken too, but i found this an it worked! Thank you so much!!

JD
December 2015

Brilliant!! Used the reset code and worked perfectly!!!!
So Pleased!! Thanks!!!

Amy Beth
March 2015

I tried this when I had the same problem and Hey Presto it worked , brilliant saved me a call out charge. Couldn't believe how easy it was, why don't they include this in the manufacturing instructions?

Mally from Hull
January 2015

Ah ha ha ha haaa it works on AZC6570 thanks

Roberto
December 2014

Got it. Step 1. Turn off the dryer and pull out the plug for one hour. Then put the plug in. Step 2. Turn dial clockwise to 6 o'clock, push the start button 3 times. Then turn dial one more step clockwice (7 o'clock) and push the start button 3 times. Viola !!! Nb!! The reason that this happend is often that there is a lot of wet dust in the way to the condence outlet hose, and the hose can be blocked. You should clean pipes behind the covers on the right of the low back side, and also remove the dust upon the heat element behind the cover on the midt back side. All to be done by hand and a torx screwdriver. If you dont clesn this, Im afraid you will get the same problem soon again. Mine is a AZC 6570.

Anders
July 2014

Cool! Thanks for the turn to 6 pm position. clicking start 3 times and then turning to airing , click start 3 times ....works. thanks!

Patrick
July 2014

IT also works on a AZC 6570. Thx!!!!

Bas
June 2014

Mine is doing the same thing . I've tried everything and still not working . Can anyone help plz .

Louise
April 2014

thank you turned it to 6 o clock press start 3 times turn clockwise 1 click and press start 3 times and presto saved myself €400.00 or 89 pints of beer at the local

BOB
December 2013

The reset code worked a treat on my mums tumbler!!! Thanks, was close to giving up

Rory
December 2013

Richard Brown did you ever solve the problem? I am having the same issue, works for a short time then fault returs.

Paul
November 2013

I'm still getting same problem it will start after that code but goes off again after a minute or so any ideas please thank you

Richard brown
October 2013

Tried it over and over again, didn't work. Is it the same for all whirlpool models. I have a start and a start delay button, does it matter which I press, do I press both? Please help.

Rob
October 2013

Thank you. Just had the same problem and fixed it - although "turn switch down" was a little too imprecise for me. Maybe "turn main control knob so that the indicator is at the bottom, press START 3 times, turn knob clockwise one click and the press START 3 times again. BRILLIANT - oh and Whirlpool you suck because no-one on your customer service team knew how to help.

Davido
September 2013

wokred thx

christophe
September 2013

Emma Oct 2011 thank you after misreading I followed it CLOCKWISE so happy.

Gavin
July 2013

I have this same dryer and my start button has disappeared inside the machine. Does anyone know how I can replace this???pls

Sherrian
June 2013

Thank you thank you - it's worked !

Caroline
May 2013

lights are flashing I need help plz as im a single mother need the reset code

liz
May 2013

Had the same problem, tried the sequence - it didn't work, tried giving it a really good clean out and saw that the bit from the filter is all blocked too (and its impossible to get the stuff out) so used a long handled kitchen scubber, poured half a mug of water down after to was the stuff out (it's where the water goes anyway so just ran into bottle) then tried the code again and it worked. Would be nice if whirlpool would tell you these things instead of trying to cost you a fortune to fix something you can fix yourself, thieving multi-corporations!!!!

Sarah
March 2013

love u all!!!!, it works. Turn dial clockwise to 6th sense, press start 3 times, turn dial to Airing, press start 3 times, wait two seconds and its fixed

michelle
February 2013

Thanks - same problem but cured by the sequence suggested - saved my neck - thanks once more emma

Cliff
January 2013

I've tried this and it's still not working any ideas?

Rachael
December 2012

my waterbottle light keeps flasing but it is empty

lyndsey
November 2012

I've just tried the "secret code" and voila!! It's fixed :O

Chambre in France
November 2012

i had the same problem. i tried the "secret code" and now is working perfectly well. thanks Emma.

Sueli
September 2012

well thanks very much just tried this and wow it works i was just about to let the scrap man take it away thanks again

Shirley
November 2011

I had to reset it according a 'secret' Whirlpool code (turning the switch down, press 3 times start, turning it one to the left, and again 3 times start). Which i did, and now it works, without any repair.
just done mine and its working again now

emma
October 2011

it is something to do with the heat exchanger the repair man turned mine to 6th sense pressed it a few times then to airing pressed it and it reset sorry i cannot remember the exact sequance if you have any luck on finding can you please post as mine has done it again thank you

emma
October 2011