check the wiring to the temp sensor on the air intake just above the glow plug relay(has a rubber boot over the top) common fault on early engines(upec) problem caused by engine cover moving on it when cab tilted.
cheekybum1977ATyahooDOTcoDOTuk
March 2011
hi
71-8 is an interruption in the glow relay G014 on Pin 10 of the ECU....G014 is the cylindrical looking solenoid with the 4 wires and the fuse above the pump units,,,could be broken wire,blown fuse and G014 at fault ..hope that helps
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lorries/trucks.