How do you test the starter on a Murray lawn tractor?

Turn on the ign. if it doens't start and is a Briggs & Stratton Mower it may be just the pinion gear on the starter that connects to the flywheel gear. These often go on Briggs starters and are inexpensive, made of plastic.
That is what caused my Briggs starter to fail. Easy to remove starter, two screws or bolts, can't recall,and see if the gear is torn up.
Check out www.mfgsuppy.com they sell them and they cost around $2.00 if I recall correctly.
Briggs and Stratton Service and Repair Instructions Page 37 part # 270962-3/92 explains it all, available at Briggs dealers or from book dealers. WWW.abebooks.com for it used.

If it is a Briggs engine you can see a IPL, illustrated parts list, at
their website
http://shop.briggsandstratton.com/BShopProductListingPage.asp?MECID=100&LRID=2&CATALOGID=56B2B9A7-283C-11D4-8886-00B0D0203414
You could see the setup, and get correct part # if it is indeed the pinion gear.
Appreciation appreciated.

William
August 2006

Turn on the ign. if it doens't start and is a Briggs & Stratton Mower it may be just the pinion gear on the starter that connects to the flywheel gear. These often go on Briggs starters and are inexpensive, made of plastic.
That is what caused my Briggs starter to fail. Easy to remove starter, two screws or bolts, can't recall,and see if the gear is torn up.
Check out www.mfgsuppy.com they sell them and they cost around $2.00 if I recall correctly.
Briggs and Stratton Service and Repair Instructions Page 37 part # 270962-3/92 explains it all, available at Briggs dealers or from book dealers. WWW.abebooks.com for it used.

If it is a Briggs engine you can see a IPL, illustrated parts list, at
their website
http://shop.briggsandstratton.com/BShopProductListingPage.asp?MECID=100&LRID=2&CATALOGID=56B2B9A7-283C-11D4-8886-00B0D0203414
You could see the setup, and get correct part # if it is indeed the pinion gear.
Appreciation appreciated.

William
August 2006