the stand withc is situeted right at the pivot point of the stand.these switchs often play up and its a safe bet to just connect or disconnect the two wires that go to it.so fid the switch then unplug it and then join the wires together LOOM SIDE then check for a spark when spinning it over from the plug you will have to take the plug out and earth it on the side of the head or another metal part of the engine.if it sparks then you have it wired ok if it doent then unjoin the wire and see if it sparks then.when its sparking put the plug back in and try starting it up.
adam bike doctor(of milton keynes motorcycle centre)
October 2010
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.