hotpoint fdw60?

I have replaced the on off button can anyone tell which wires go where on the 4 terminals pleas

Stuart
October 2012

hotpoint fdw60

fast & delicate light comes on after a few mins & then empties & stops

gary
December 2011

buttons flashing on dishwasher fast/prewash

vicky pengelly
November 2011

Just to let everyone know: The phone number for Hotpoint is now 08448 225 225
They are open Mon-Fri 0800-1730, and Sat 0830 -1730

Broken Dishwasher 2010
October 2010

Hi thank you to the above reviews. We have an hotpoint fdw60 & we had the problem with the flashing lights. Read the above reviews & ordered an heating element for it £41.00, my husband has just fitted it & bobs your uncle its working. Thank you soooo much.

Steph
January 2010

manual:

http://imagebank.indesitcompany.co.uk/brochures_online/pdf/Hotpoint/Dishwashers/FDW60_FDW65.pdf

ian
December 2009

I had the same problem with my Hotpoint FDW60 and read all the online reviews about how baddly made the FDW60 is and after taking it apart I totally agree.



As the warning lights were indicating a faulty heating element I checked it to find that it was not working. I bought a replacement for £43 at my local electrical store (I think they then ordered it online). Taking the bottom off is easy but once off, it is very difficult to actually get to the element, but it can be done. I had to buy new hose clips to fasten the rubber pipe each side too. It has been on twice today and so far so good.



I have read some message boards and have seen that some people have had to replace the element a number of times, so I will wait and see what happens.



Be aware the heating element is not your usual heating element, it looks more like a insulated metal tube: http://www.buyspares.co.uk/cgi-bin/search.pl?query=heating+element+fdw60



Good luck



Rob

Rob Sloan
February 2009

Hi,
Have the same problem which the service centre said was the heating element as you advise. An engineer called as it is still under warranty and tested the element but said it was fine. Had to order a new controller board which is located behind the start button in the door. Will let you know if this fixes the problem.

GandalftheWizard
February 2009

FIXED IT HOTPOINT FDW60

Ok hear we go the problem with the dfw60 has been solved
This explanation is in plane English!!!!
The fault as stated in the first post was FAST 40 and DELCATE 50 not the first form the left or 1000’Th light from the right light which confused the hell out of me!!! Which made the dishwasher start up then stop and drain its self and put up this error code of flashing these lights?

Any way it was the heater at fault that’s all
So I contacted Hotpoint direct on 08709077077 and ordered a new heater
Part number C00057684 and it only cost £37.03 Inc vat and p&p

Got hubby to install it as he is an electrician and away it went
Good as new

So there we go all done I hope this post helps the people like me .non technical

kirsty
July 2006

also where can i download a manual for my dishwasher any one know.

kirsty
July 2006