Recent: Home max fs506x?

Mend > Blenders/Mixers

Mend Kenwood Chef Replace

How do I open the gearbox on my Kenwood Chef to replace the grease?

The grease in my Kenwood Chef has liquified over time and drips into the bowl. I have removed all the screws from the gearbox top but am struggling to separate it from the bottom half. Seems to be the gasket sealant that is bonding it together.

Rob
September 2010
KenwoodKenwood ChefKitchen Appliances, Blenders/MixersKenwood Chef Replace
how to open gear box for btf 040

sami
January 2014
make sure you have taken all SIX BOLTS out of the top then unscrew the domed bolt in the centre of the part underneath that the paddel fixes to, tap the gear box a few times at the joint all the way round with a small hammer and it should come apart. I have just opened one that way. Take care not to lose any pieces Good Luck

Frank Wilson
September 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Kenwood Chef Replace

Related Questions ...

Mend Kenwood Chef Mixer Replacement
3

Replace Spigot on High Speed Outlet Cover on Kenwood Chef?

The plastic spigot on the High Speed Outlet Cover (Part No 17375) for my old Kenwood Chef Model A701 has worn... [Read more]
Mend Kenwood Chef KM200
1

How to remove the planet hub cover?

I need to replace the planet hub on my Kenwood chef KM200, but need to know which way it unscrews. Is it anti ... [Read more]
Mend replace kenwood chef a901
1

How to replace brushes on Kenwood Chef A901?

How does one open up the Kenwood Chef A901 so that one can replace the brushes?
Mend kenwood speed off
9

Kenwood Chef - speed knob - how do I get it off?

I am trying to replace the motor in my (very old) Kenwood Chef with a motor from another (even older) Kenwood ... [Read more]
Mend Kenwood Mixer Stuck
2

Hello, I have a Kenwood chef A701A which is stuck on full speed -yikes?

Hello everyone. I think I need to replace the controller as it will only run at full tilt !!! lovely old low m... [Read more]
Mend control model serial
2

repair/replace speed control module on my Kenwood chef model A701 ?

Serial No 228993. this machine will no longer operate at lower speed settings and runs from switch on at maxi... [Read more]
Mend food mixer speed control kenwood
3

Kenwood CHef Food Mixer Model A901 Speed control?

Kenwood chef speed control model A901 with mechanical govenor. resistor burnt out olso 0,o47mf capasitor bu... [Read more]
Mend change kenwood motor
2

How do i change the carbon brushes on a kenwood chef?

Am needing to replace the brushes on a kenwood chef...but am not sure how to get into the motor and do not wan... [Read more]
Mend How to mend it?
2

Rubber feet on kenwood chef?

Does anyone know the easiest way to replace the rubber feet on a kenwwod chef? When I prise the old ones out ... [Read more]
Mend How to mend it?
2

How can I procure a service manual for Kenwood Chef A.901?

Whilst in operation, the coupling between the Kenwood Chef A.901 drive & the Liquidiser Model A.990 overheated... [Read more]
Mend How to mend it?
2

Kenwood Chef #A 702 has worn stoppers on the base of the machine?

I am looking to replace 5 stoppers on the base of my Kenwood Chef # A702 mixmaster. I live in mid-city Toronto... [Read more]
Mend kenwood chef a901
1

How do I change the small pulley and tension bar on my Kenwood chef A901?

The small pulley (coarse tooth) on my Kenwood chef mixer A901 is worn. I have the parts (small pulley and ten... [Read more]
Mend kenwood chef a901
2

Kenwood Chef A901. Which capacitor do I need?

something went 'pop' recently and smoke came out. I stripped it down. On the underside of the motor is an ad... [Read more]
Mend Kenwood Chef Attachment
1

Will Kenwood Chef potato peeler cover from an A901 fit my A991?

I'm trying to replace the cover on my Kenwood Chef A991 potato peeler attachment. The only replacement I seem ... [Read more]
Mend mixer blender repair

Bang, smell and smoke?
Mend kenwood base processor

Repair Kenwood?
Mend mixer Kenwood motor

kenwood chef km200 mixer?
Mend Kitchen Appliances, Blenders/Mixers

How to re-enamel the casing?
Mend bowl hello normal

Oil leaking into bowl?
Mend Kenwood Chef Mixer Replacement

Replace Spigot on High Speed Outlet Cover on Kenwood Chef?
Mend cover kenwood machine

Cover removal?
Mend Kenwood Mixer Repair

Kenwood Chef KM001?
Mend change replace drive

How to change small pulley on kenwood KM020?
Mend Kenwood Mixer Replacement

Help with Kenwood KM331?
Mend knob speed kenwood chef

How can i get the knob back on?
Mend kenwood service manual

kenwood km201 service manual?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Blenders/Mixers ...

Other models...

Kenwood 701AKenwood 901Kenwood A701Kenwood A701AKenwood A702Kenwood A703CKenwood A707AKenwood A901Kenwood A901DKenwood A901EKenwood A907DKenwood Chef 901Kenwood FP520Kenwood KM200Kenwood KM201Kenwood KM210Kenwood MajorKenwood PM900

Related Categories

Mend Breadmakers
Breadmakers
Mend Coffee Machines
Coffee Machines
Mend Cooker Hoods
Cooker Hoods
Mend Dishwashers
Dishwashers
Mend Electric Cookers
Electric Cookers
Mend Electric Kettles
Electric Kettles
Mend Food Processors
Food Processors
Mend Freezers
Freezers
Mend Fryers
Fryers
Mend Gas Cookers
Gas Cookers
Mend Juicers
Juicers
Mend Microwaves
Microwaves
Mend Refrigerators
Refrigerators
Mend Toasters
Toasters
Mend Waste Disposal Units
Waste Disposal Units

Topic

Kenwood Chef Gearbox: Opening & Grease Replacement