Samsung ER 4940 won't operate?

E1 just means wrong input, so it is a general error.
Firstly, try this:

Turn power off at wall
Turn key to P mode
Hold down SUBTOTAL while you turn power on at wall
Turn back to REG mode and try it again.
If you get a 'CLOSED' message, then you will need to log in.

Make sure you aren't using a decimal point if you are inputting prices as this can cause the error also.

-----------------------------------------

If anyone needs / looking for a Samsung ER-4940 manual, c-tech has one here:

http://the-checkout-tech.com/manuals/cashregisters/Samsung_ER-4940_dealer_pocket_programming_guide_manual.html

Registerman
August 2010