My diplomat dishwasher ADP8242 has stopped working with the first three lights flashing and the fifth one illuminated (not mentioned in the error codes in the manual). Tried restarting a few times but still after a few minutes a beep then it stopped and the above lights illuminated, any suggestions before i call an engineer.
I have been doing dishes by hand all xmas - thank god its fixed!
Nicola
January 2011
Thanks John, fantastic!!!!... It worked, you're my hero :-)
We struggled to get the two outer lights to illuminate, we even doubted you at first, but hey, timing is everything, as you said!! The inner two nearest the programme button kept illuminating. We're up and washing again!
Emma
April 2007
Turn off at the power button and leave for 10 seconds.
Turn on power button and press the program button 4 times
I found that you had to be very quick pressing the program button four times after powering up. You know you've hit it right when then two outer lights stay lit.
Then push the program button once.
Then power off (without closing the door).
Wait 15 seconds then power up and the reset should have taken place
john squibb
December 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.