How to bypass winkers from flashing while braking?
I have Lifan 250 from new,when I brake (front or back)
brake light comes on as it should ,also all indicators flash four times this happens every time i brake.
Although this has not coused any problem but I am concern that MOT test might fail due to this !
Does anybody know how to bypass this system so that only brake light comes on when brake as it should with all other cars bikes etc.
Any advice is appreciated
Thanks bb it worked, I found the wire using multi meter and disconnected it ,now the brake light worke as normal.
Once again many thanks.
Best wishes
Mark Rian
Mark Rian
June 2010
Thanks for your advice bb, I'll have a go.
Mark rian
June 2010
clearly you have a short/dodgy connection. This may well be a loose wire or when you brake something touching something else.. I would start by looking getting you hands dirty and tracing the wires back from indicatrs or indicator unit and check all wires, I would use a multi meter, or get a mate to use one and check. Its a case of elimination.
bb
June 2010
I can answer this question...
How to bypass winkers from flashing while braking?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.