Turned the shower on, there was a burst of water then it went ofF as did the power light on the shower unit. The light on the mains socket is on but the light on the actual shower unit is not.
when the shower is switched on i get a knocking/tapping noise coming from behind heater control knob...i can see behind this is 2 microswitches...could they be faulty?
Tommo
January 2018
Fitted shower week ago, its just cold water, even if the temperature dial is fully turned,
So angry, the shower before this was a different make but was 8.5 kw and was perfect, Any suggestions?
Rab
April 2016
Hi my shower goes really hot then u hear some thing click then go cold I have changed the value and changed the hose what else can it be thanks
Karen
November 2015
i had one fitted today and there is not hot water whatsoever just cold.
The plumber is suggesting i need thicker wire from the fuse box but i have only replaced like for like shower ie 8.5kw for 8.5kw and this is why the shower is not producing hot water. Have i been conned by the plumber or could there be a fualt on the shower?
lindab
January 2015
I have a Triton Madrid shower approx 5 years old - water keeps going hot then cold throughout having a shower - really annoying - any ideas ?
melissa
July 2012
Water is pouring out of a little pipe connected to the outlet, i think it is some sort of relief valve or something. How do i fix this
Paul
July 2012
the light on the unit flicker, and is not fully bright. The water is only luke warm. Cannot get hot water.
gpsv
June 2011
I have fixed many tritons, the most usual trouble is caused by overheated burnt internal wires and soldered connections ,the fluxes used in the manufacturing process corrode and the electrical resistance overheats the plastics. All fixable if you can solder/crimp and strip the delicate parts .Power must be off and common sense needed.Heavy use in damp conditions kills these units.Its a sparks job to be safe,most just replace the whole thing .
Bob.
June 2010
sounds like a fault on the main switch.
check for loose connections burnt wires etc.
may be the switch has burnt out.
howtomendit.com for free repair help, information and advice.
