Recent: Windows 11, Dell 5450, JBL Bluetooth headphones?

Mend > Toilets

Mend Derwent Macdee Removing Remove Screw

removing the syphon?

I need to remove the syphon from my toilet to get to the screw underneath because its leaking,a book I read says there is a large nut underneath, but there is not, does the syphon just lift out, It is a derwent macdee syphon unit, thanks

alan
April 2010
is the cistern sitting on the pan if so you need to isolate the water supply drain the cistern by flushing loosen 2 small wingnuts holding the cistern to the pan disconnect the water and cistern will lift off. unscrew big nut underneath cistern and siphon will then pull out

ahplumb
May 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Removing Remove Screw

Related Questions ...

Mend washing machine bosch filter
1

removing front panel of boschclassixx 7 washer?

bosch classixx 7 washing machine, I need to clean the filter but it is stuck so I can't unscrew it. Very helpf... [Read more]
Mend thermostatic valve shower
1

Stuck thermostatic valve?

Hi, I have a Triton bar shower from which I need to remove the thermostatic valve so that I can service or ... [Read more]
Mend washing machine zanussi removal
2

Removal of soap draw carcass Zanussi FL828?

I want to remove the plastic carcass that the soap draw goes into from a Zanussi FL828 washing machine. I ha... [Read more]
Mend fan element removed
1

Removing fan in bosch HBN7052GB/01 1700?

I'm replacing the element in my Bosch oven, I've removed the back plate and the clockwise screw and washer to ... [Read more]
Mend How to mend it?
2

Removing AGA hotplate covers for cleaning?

The older AGAs had a simple hinge system. As I remember the hinge pins were grooved and secured by small grub... [Read more]
Mend panel remove dryer
1

removing the back panel?

what kind of tool do I need to remove the star drive screws from the back of the dryer? conventional screw dri... [Read more]
Mend washing machine electrolux bearings
1

Electrolux EW1080F: removing screw holding pulley?

I need to remove the screw holding the main pulley on the drum to replace bearings. Has the screw got a left o... [Read more]
Mend chuck makita drill
1

How do I remove the chuck?

How do I remove the chuck from a Makita 1500 corded hammer drill? I did remove the screw by turning clockwise... [Read more]
Mend remove tap tap
2

how do i remove tap cover from single monoblock mixer tap?

how do i remove tap cover to monoblock? after removing grub screw and surclip from top brass tap fitting. cove... [Read more]
Mend remove lock barrel
1

How do I remove a lock barrel?

I am attempting to remove a defective lock barrel (LCT) and have followed the procedure of removing the screw ... [Read more]
Mend washing machine remove screw
1

how to get hinge back plate that has fallen?

I ordered a new door hinge and whilst removing the old hinge, a back plate seemed to drop into the washing mac... [Read more]
Mend top tap handle
1

leak at the top of tap fitting on our a monobloc mixer tap?

I have leak at the top of tap fitting on our a monobloc mixer tap. It works by lifting (tilting back) a handl... [Read more]
Mend problem mower idle
1

Mountfield Empress 16 carb problem. Mower has stood idle for years?

Thanks Iain. After filling the tank, petrol did appear to flood between the join on the bowl. On the underside... [Read more]
Mend broken wooden door remove
5

How can I remove a screw which has snapped?

I have snapped a screw in a wooden door. Has anyone got any tricks or tips for removing a screw without a scre... [Read more]
Mend remove barrel removed
6

Lost key;how do I remove the barrel from a pvc door lock? ?

I have removed the door through removing the hinges. Taken off cover strip. Removed small screw that I presu... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Toilets ...