Can anyone tell me if the wheel nuts on the left side of a JCB 3C mk11 are normal righthand thread or left hand thread as on commercial vehicles. I need to take a wheel off and there is insufficient thread showing to see which hand it is.
On my 2005 3cx they are normal RH thread. Mine were a pig to get off though. You need a 1 and 1/8" socket (28mm is tight, 29mm will do) and a scaffold pole....
Skip
May 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
