I had a Triton T80z Electic Shower fitted. During installation we were allowing the water to flow as per instructions but suddenly the water stopped and the shower turned off. Since this I get a power light on the pull cord but when I press the power switch on the unit nothing happens (no power light). Can anyone advise as to what may be the problem? Any help would be greatly appreciated.
thermal cutout won't cause no power.
you will still get water flow as the solenoid is on a different circuit in the shower.
sounds like you have a neutral fault.
check all your neutral connections shower, pullcord.
hi-spec plumbing & heating (essex)
April 2010
my guess is that the thermal cut-out on top of the water heating tank has operated. You can check this with a multimeter. If it is open circuit you need a new one.
I hope this helps,
Paul M
April 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.