Recent: Safely remove screen protector from a Macbook Air?

Mend > Photocopiers

Mend Proscan Tv Signal Problem

tv?

after an electrical outage my pro-scan tv no longer has sound. my service says it has nothing to do with the signal but problem w/tv itself. Seems inconceivable that both speakers would go at the same time. any suggestions?

Ellie
March 2010
Your question is in the Photocopier category - but no matter...

Your speakers are very probably perfect - there will almost definately be an electronic fault with the circuitry that process the sound signal before sending it to the speakers.

It is inconceivable that the signal into the TV set has had the sound component removed from it.

You have a broken TV set.

Peccavi
March 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Tv Signal Problem

Related Questions ...

Mend panasonic dvd recorder
1

Panasonic DVD Recorder Screen 'Noise'?

Panasonic hard disc and dvd recorder. Several years old now. Works & records OK except that there is 'noise' ... [Read more]
Mend samsung plasma remote
2

Samsung Plasma TV every button on remote turns TV off?

TV is a Samsung FPT6374X/XAA. After turning the TV on, pressing any button on the TV turns the TV off. Serious... [Read more]
Mend screen displays tv
1

Screen displays 'No signal' after trying to update?

Screen continues to say 'No signal' Have also tried a portable aerial which works on another TV but the conne... [Read more]
Mend How to mend it?
1

How can I stop sound fluctuations in my Panasonic Viera TX-L37ET5B tv from ?

The sound on my Panasonic smart tv fluctuates quite dramatically mainly on music but also on speech .A suggest... [Read more]
Mend reception signal channels
3

Freeview box ?

Sony freeview box TV an elderly Kenwood flat screen bit like its owner, old I mean not flat. Why am I losing... [Read more]
Mend Samsung No Signal Bit Error
1

No Signal and bit error on Samsung TV?

I have a Samsung tv model LE32N738 73B I get an erratic recurring problem.No signal and bit error level 10.wh... [Read more]
Mend fault time message
4

Toshiba fault finding?

I have a Toshiba 19inch Digital TV in my bedroom but from time to time I get the message that no signal is bei... [Read more]
Mend aerial signal tv
1

Thompson dvb recorder?

Problem with aerial connection My aerial connection works directly on my Hitachi tv but when I plug the aeri... [Read more]
Mend thomson tv switch
1

problem with my Thomson Wysius plasma tv?

when i switch on my thomson wysius tv it says DVI no signal being received. when i press av button it says RGB... [Read more]
Mend satellite receiver signal
1

SKY Digibox does not seem to hold signal for more than 30 seconds??

We have an old skydigibox, a Pace DV3 about 7 yrs old that we use with a sky freesat card, they issued a new o... [Read more]
Mend satellite signal receiver
1

No satellite signal being received?

My Thomson SKY receiver box is displaying "signal code 29" and displays a message through the TV "no satellite... [Read more]
Mend How to mend it?
2

Thompson DTI 6300 jumping/stutter/sound and video?

Hi, Just wondered if anyone else has experienced this problem since the digital switchover, its a pain, I c... [Read more]
Mend warm problem turn
1

Warm up problem? - Toshiba TP50H60?

Toshiba TP50H60 Looking for some help to fix my TV. I turn it on, and almost immediately I get “snow” on... [Read more]
Mend turns fine warning
1

sagem digibox cut off signal?

no signal on my sagem digibox it turns on fine, but goes to technical information warning, advising to adju... [Read more]
Mend TV Signal Aerial
2

techwood 32832 problem?

I connect my aerial and and the svreen displays a digital reading to say theres no signal, then I connect my v... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Photocopiers ...