Entering Audio Codes?

1. Switch on ignition.
2. Switch on the radio, if turned off.
3. The display shows 'CODE'.
4. Press button BAND button longer than 3 seconds.
The display shows '10 _ _ _ _', which indicates that you have
ten attempts left at entering the correct PIN code.
5. Enter the PIN code with preset buttons 1, 2,3 and 4.

Press preset button 1 for first digit
Press preset button 2 for second digit
Press preset button 3 for third digit
Press preset button the middle round one for the forth digit.

6. Press button BAND longer than 3 seconds. After that, the
radio starts with operating.
Important:
After the 1st wrong entry of the code number, the display shows:
" 9 - - - - ".
After 10 seconds, the display shows:
" 9 S A F E ".
If you have entered a wrong code two times, 4 dashes will be
shown in the display for about 10 minutes together with the number
of remaining attempts to enter the code.
If you have entered a wrong code, do not turn the unit off until
"SAFE" and the number of remaining attempts for code entry
is shown in the display.
If you have entered a wrong code 10 times, the following appears
on the display:
" D E A L E R ".

hay88
March 2010