Recent: Fix food processor motor?

Mend Motorcycles

Mend Vehicles, Motorcycles
Find out how to mend it for free.

Ask Question
Mend Vehicles, Motorcycles
Click here to mend motorcycles

Mend > Motorcycles

Mend Vehicles, Motorcycles

(part 2) starter relay! Adam or another bike genius required!?

adam i replied to the last post you put on my other question page:

http://www.howtomendit.com/answers.php?id=325759

as i said, sorry for not replying right away but i dont get to get online much. please post here what you think i should do. moneys abit tight at the moment so i cant just go buying parts till i solve the problem, i want to be certain im getting the right part. thanks to you and everyone else for all the help given so far :D

Gary
March 2010
i have one!!! new aswell! eay way to tell if you starter is goosed is to find the 4 prong yellow relay which is always behind the battery, take out relay,split pin between the 2 thick red wires and hey presto, if your bike starts its the relay and if not its the starter, i fit shed loads of these in work, you can actually fix them by replacing the brushes inside, they are the same as cars you just have to file them down to the right size, piece of pi** interested in starter, ebay user martd01 contact me there

m
March 2010
Thanks for all the help mate, really appreciate it. unfortunately electrex world dont do a starter motor for a speedfight 2 100cc. looked at peugeot scooter website and it was about £160!! think i might have alook about lol or ill prob get a second hand one off ebay if i can. thanks again mate, saved me money and time that i dont have lol :D

Gary
March 2010
yes and yes you have cracked it mate the starter is fubar(f*cked up beyond all recognition).if the power is getting to the starter then it should spin around an mif it dont then thats the problem.a new starter is about 40 for a pattern one i have no idea of the cost of a genuine one its alot check the link out its to electrex world who mke pattern speedfight starter motors and lots more .i use them at the shop i work at they are great
http://www.electrexworld.co.uk/peugeot-scooters-10125-0.html

adam bike doctor
March 2010
i connected the wire but nothing happened. i also connected a multimeter to the positive terminal of the battery and the other lead to the rubber cased positive lead that goes into the starter motor. when i pressed the electric ignition the multimeter went up. so a few points:

1) does this mean power is getting to the starter motor?

2) does this also mean its the starter motor thats knackered because power is getting to it but not doing anything?

3) if it is, how much is a new one likly to cost me?

thanks for all the help given :D

Gary
March 2010
ok sorry gary i must have missed the reply,what i would do is this,make sure the battery is charged up and good,get a long enough bit of thick wire to run from the battery to the starter motor ,clamp one end of the wire under the live red terminal of the battery and then pull the rubber cover off the live terminal on the starter motor and push the other end of the wire you put on the battery to this starter motor terminal and see if the starter motor spins around.if it doesnt then the starter motor is in need of replacing or rebuilding,the brushes may be worn of the brush springs may be weak or the armature may even be burnt out or have a broken wire.if it does spin over then follow the wire from the live terminal on the motor to the relay and put the live wire from the battery to that and see if it spins over.tell me what you find.ok good luck.

adam bike doctor
March 2010
Mend Vehicles, Motorcycles
Click here to mend motorcycles

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vehicles, Motorcycles
Click here to mend motorcycles