THe pump stall can take out the fixed fuse and the power transistors on the control board. I have found that the pump turns OK - there was nothing jamming it, the control board burnt out when doing the clean cycle ... I might need a new pump because I can't open the pump to clean it up ...
Agrade
February 2014
error 245 is a pump stall. Take the pump out from the bottom of the machine (2 screws) and clean it out. The resistance between the red and blue, blue and white, and red and white wires should be 16 ohms, if not, replace the pump. If pain persists see your authorised repairer.