i have put a points model 125cg engine into a honda xl125 cdi model. i would just like to know how to get cg engine starting as i have no wiring loom for either engine what wiring from engine goes to coil ect. just field bike so just need starting no lights on any charging system.
look at the points and you will see a wire going to them,follow this wire(note the colour).then wire that into a condenser (12 volt) mount this on the frame so it has an earth then runthe same wire into the low tension lead of a 12 volt points secondary ignition coil,its really easy.to make a kill switch for it simply run another wire from the one on the condenser up to a kill switch that goes to earth when pressed on the handlebars.So you need to buy a 12 volt condenser with one wire/a secondary points type ignition coil with one low tension lead and a kill switch.i have got a spare cg coil with a condernser mounted on the side of it if you want it tell me and ill put it on ebay for a tenner +postage.up to you.
adam bike doctor
February 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.