Recent: Fix food processor motor?

Mend Riello Home Heating Systems

Mend Heating, Home Heating Systems
Find out how to mend it for free.

Ask Question
Mend Heating, Home Heating Systems
Find out how to mend Riello home heating systems

Mend > Home Heating Systems

Mend Riello 40 Oil

Riello 40 G3B oil fired heater?

I have a Riello 40 G3B Type 437T50 code 3743750 oil heater. The burner starts but only ignites for a second and then goes out again. this happens approximately every five seconds. It does not lock-out. What is the problem and how do I fix it?
Thanks in advance

Brian
February 2010
Faulty photocell

erorrp
December 2014
This sounds like a control box fault and may need replacing however without more detail its hard to say. check the fuel pressure if you can, make sure you are getting a constant pressure and not drawing in air from the oil filter. once lit the control box is looking for a flame, if flame is lost it may try a few times to light but should go to lockout after a few cycles . check the fuel pump solenoid and valve if they are faulty it may explain why there is a problem i belive it is a 240v solenoid. The metal surround with a round nut ontop of the fuel pump needs to have good contact on the top of the pump to work correct.

farmer
March 2010

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Riello 40 Oil

Mend Heating, Home Heating Systems
Find out how to mend Riello home heating systems

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Heating, Home Heating Systems
Find out how to mend Riello home heating systems