what is the easiest and most cost effective way to find if i have leak in ch system.i have pipes to rads which run under big floor boarding.the reason i ask is my boiler has problems holding good pressure.i have had most parts changed and the boiler has been vituelly re-built.it has been doing this for 3 years but was told by various plumbers that if i had a leak somewhere it would show thru by now,is this true.
whenever pipes are installed/run under floorboards provision should always be made to allow pipe inspection via screwed down removable boards, or even a trap door installed on (ground floor only) , I've knocked many a hole through in the base wall to give me access to other rooms when the customer don't want surface run pipes (pipes that can be seen)
wirecutterman
February 2010
my brother had a leak under his floor. and it did not show up , as the water was going down into the ground , and not up" as the pipes were deep down, and the leak was slow , and drained away slow . can be very hard to find as you know , sorry i cant help you m8. but im sure somebody on this web site has the answer, so come on lads and ladys"
mark
February 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix plumbing.